Shop all glass cutters
Shop professional glass cutters for accurate, consistent scoring across a range of glazing applications. Elite Glass Solutions supplies glass cutting tools for professional glaziers, glass processors, installers and trade customers throughout Australia.
Our range includes Toyo hand glass cutters for controlled manual scoring, glass speed cutters for faster straight cuts across larger panels, adjustable circle cutters for round openings and replacement cutting heads. Glass cutter fluid is also available to lubricate the cutting wheel, support a cleaner score and extend wheel life.
Choosing the right glass cutter depends on the type and thickness of glass, the required cut, the cutting-wheel angle and how frequently the tool will be used. Browse all glass cutters below or select a category to compare hand cutters, speed cutters, circle cutters and glass cutting fluid.
-
Price
$27.25
$29.98 inc. GST
-
Price
$27.25
$29.98 inc. GST
-
Price
$146.30
$160.93 inc. GST
IMPORTANT: This product must be collected.
Stock:
1 in stock (Stock is low)
-
Price
$154.25
$169.68 inc. GST
IMPORTANT: This product must be collected.
Stock:
in stock (Stock is low)
-
Price
$168.05
$184.86 inc. GST
-
Price
$138.35
$152.19 inc. GST
Stock:
Currently out of stock
-
Price
$139.60
$153.56 inc. GST
-
Price
$84.65
$93.12 inc. GST
Stock:
1 in stock (Stock is low)
-
Price
$24.20
$26.62 inc. GST
Stock:
Currently out of stock
-
Price
$66.55
$73.21 inc. GST
-
Price
$78.65
$86.52 inc. GST
How to choose a glass cutter
A glass cutter does not cut completely through a panel. The cutting wheel produces a controlled score line that allows suitable glass to be broken along the intended path.
Choosing the correct cutter helps produce a cleaner, more consistent score while reducing material waste and unnecessary cutting-wheel wear.
Before selecting a glass cutter, consider:
- The type and thickness of glass
- Whether the required score is straight, shaped or circular
- The maximum length or diameter of the cut
- Whether the work will be completed in a workshop or on site
- How frequently the cutter will be used
- The specified cutting-wheel angle and working range
- Whether an oil-fed cutter is preferred
- The availability of replacement heads or wheels
For general glazing work, a hand glass cutter is normally the most versatile option. A speed cutter may be more suitable for long, repeated straight scores, while a circle cutter is designed specifically for circular work.
Glass cutter comparison
| Cutter type |
Best suited to |
| Hand glass cutter |
General straight and shaped scoring |
| Oil-fed hand cutter |
Frequent manual cutting with automatic wheel lubrication |
| Glass speed cutter |
Longer, repeatable straight scores |
| Circle glass cutter |
Circular scores and round openings |
| Replacement cutting head |
Replacing a compatible worn or damaged head |
| Glass cutter fluid |
Lubricating compatible cutters and cutting wheels |
Hand glass cutters
Hand glass cutters are compact tools used for general straight and shaped scoring. Their size makes them suitable for both workshop and on-site work, while the handheld design gives an experienced operator direct control over pressure, direction and scoring speed.
Elite supplies Toyo hand glass cutters with metal and plastic handle options. The current TC-30 listings specify an automatic oil-feed system and a 140-degree carbide cutting wheel.
The preferred handle will largely depend on grip, balance and personal cutting technique. Before ordering, check that the cutter’s wheel specification is suitable for the glass being processed.
Browse hand glass cutters
Glass speed cutters
Glass speed cutters are intended for longer straight scores where additional reach and alignment are useful. They can reduce the need to reposition a short straightedge or reach across a larger panel while scoring.
Elite’s range currently includes glass speed cutters in 60cm, 90cm, 120cm, 150cm and 180cm listed sizes, together with a replacement head unit. Longer products may be collection-only, so check the individual product page before ordering.
Choose a size that can complete the intended score without requiring the tool to be repositioned partway through the cut.
Compare glass speed cutters and replacement heads
Circle glass cutters
Circle cutters are designed to score a consistent circle around a fixed centre point. They are useful for circular openings and other work that cannot be completed with a standard straightedge cutter.
The adjustable arm establishes the size of the circle, while the centre suction cup or pivot helps keep the tool in position as the cutting head moves around the glass.
Elite currently offers oil circle cutters in 60cm and 80cm listed sizes. Confirm whether the listed measurement refers to the tool’s maximum diameter, arm length or another working dimension before ordering for a specific opening.
Browse circle glass cutters
Cutting-wheel angles and glass thickness
The cutting-wheel angle is one factor in determining whether a cutter is suitable for a particular glass thickness and application.
Do not select a glass cutter from the wheel angle alone. Different cutters with different angles may be designed for different glass types, thickness ranges and cutting methods. Professional cutter ranges commonly nominate both a wheel angle and a compatible glass-thickness range.
Also consider:
- Cutting-wheel material and diameter
- Glass composition and surface treatment
- The cutter manufacturer’s nominated working range
- Whether cutting fluid is required
- The condition of the cutting wheel
- Operator pressure and scoring speed
Where the glass falls outside the cutter’s documented working range, seek technical advice before processing the finished panel.
Why use glass cutter oil?
Glass cutter oil or cutting fluid lubricates compatible cutting wheels and moving components. It can help the wheel move consistently and reduce unnecessary friction and wear.
Some hand cutters store fluid in the handle and feed it automatically to the cutting head. Other cutters require fluid to be applied or added according to the manufacturer’s instructions.
Use a purpose-made glass cutting fluid that is compatible with the cutter and any later glass-processing, cleaning, bonding or sealing work.
Can toughened glass be cut?
No. Toughened or tempered glass cannot be cut, drilled, shaped or edgeworked after the toughening process.
All holes, notches, cutting and other fabrication must be completed before the glass is toughened. Attempting to score an existing toughened panel is likely to cause the entire panel to fracture.
Before attempting to cut an existing panel, establish what type of glass it is. Where the glass cannot be positively identified, consult an experienced glass professional.
Glass cutter FAQs
An oil-fed hand glass cutter is often the most versatile choice for general manual glazing work. It can be used for straight and shaped scores and is compact enough for workshop or site use. The cutting wheel must still be suitable for the type and thickness of glass.
Use a hand cutter for general manual scoring, a speed cutter for longer straight scores and a circle cutter for circular work. Also consider the glass thickness, wheel specification, maximum cutting length and whether replacement heads are available.
No. Glass cutters and cutting wheels have specified working ranges. Check the individual cutter’s technical information rather than assuming that one tool is suitable for every glass thickness.
Use cutting fluid when it is required by the cutter manufacturer. Oil-fed cutters are designed to lubricate the wheel during scoring. A purpose-made glass cutting fluid should be used rather than an unidentified general-purpose lubricant.
A second pass is not recommended. It can damage the original score, wear the wheel and create competing fracture lines. Position the guide carefully and aim to complete one continuous score.
Use firm, even pressure that produces a continuous score without crushing or chipping the glass surface. Excessive pressure does not necessarily improve the cut and may increase wheel wear.
No. Toughened glass cannot be cut or modified after toughening. All fabrication must be completed before the glass enters the toughening process.
Use appropriate eye protection, cut-resistant gloves, protective footwear and clothing suitable for glass handling. Work on a stable, clean and adequately supported surface, and manage sharp edges and offcuts carefully.